50
USB STORAGE
Displaying Thumbnail Menu (continued)
Message Description
No Media
USB storage is not inserted into USB STORAGE slot on 
the projector.
Broken Media
This is an alarm message that USB storage inserted into 
USB STORAGE slot on the projector is broken.
Bad format
This is an alarm message that USB storage inserted into 
USB STORAGE slot on the projector has a noncompliant 
format.
Media loading
Loading  files  in  the  USB  storage  inserted  into USB 
STORAGE slot on the projector. Please wait for a while.
Ready
Preparation  of  thumbnail  display for  the USB storage 
inserted into USB STORAGE slot  on the projector has 
been completed. Please wait for a while more.
•  Do not use this function other than private purposes. It might infringe copyright 
laws.
•  Back up all of the data in the memory card, in case any data are lost due to 
unexpected accident.  Any liability for the loss by mistake or malfunction shall 
not be assumed.
•  Depends on USB Storage Devices, Thumbnail display might disappears once 
at the beginning of connection and comes again.
Controlling the projector
While Thumbnail menu is on screen, some buttons on the projector and remote 
control are assigned some designated functions to support the menu operation. 
If normal EASY or Advanced MENU on screen, or INPUT SELECT function is 
required, select PJ CONTROL item on the Thumbnail menu. 
Use ▲, ▼, ◄ and ► buttons to move a cursor to the PJ CONTROL item in 
Thumbnail menu.  Push ENTER button on the remote control or INPUT/ENTER 
button on the projector to decide the selected item. Following items can be 
controlled. 
PJ CONTROL items
Item Description
MENU
Display EASY/Advanced MENU of the projector. Select [MENU] 
using ▲, ▼, ◄ and ► buttons, then push ENTER button on the 
remote control or INPUT/ENTER button on the projector.
INPUT SELECT
Change input port of the projector. Select [INPUT SELECT] using 
▲, ▼, ◄ and ► buttons, then push ENTER button on the remote 
control or INPUT/ENTER button on the projector, so the input 
port will be changed from USB STORAGE to S-VIDEO.  Then, 
Thumbnail menu will be disappeared.