English
9
OPERATION AND MAINTENANCE
NOTE:
The information contained in this Instruction Manual is designed to assist you in the safe
operation and maintenance of the power tool.
Some illustrations in this Instruction Manual may show details or attachments that differ
from those on your own power tool
NAME OF PARTS
SPECIFICATIONS
Motor Single-Phase, Series Commutator Motor
Power Source Single-Phase, 120V AC 60Hz
Current 6.2A
No-Load Speed 550 / min
Capacity
Steel 1/2" (13mm)
Wood 1-5/8" (40mm)
Weight 6.6 lbs (3 kg)
Fig. 1
Gear cover
Nameplate
Drill chuck
Switch trigger
Stopper
Brush cap
Bolt
To Next Page
Loading...
