3
DRILL SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
Model D10VF D10VG D13VF D13VG
Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)
Power input 710W*
No load speed 0–3,000/min 0–1,200/min 0–850/min 0–600/min
Drill chuck capacity 10 mm 13 mm
Steel
Twist Bit 10 mm 10 mm 13 mm 13 mm
Hole Saw – 38 mm 51 mm 70 mm
Capacity Flat Spade Bit 25 mm 32 mm 40 mm 40 mm
Wood Auger Bit – – 32 mm 38 mm
Hole Saw 29 mm 70 mm 102 mm 114 mm
Weight (without cord)
Spec. for keyed chuck 1.8 kg 1.9 kg 2.1 kg 2.1 kg
Spec. for keyless chuck 1.8 kg 1.9 kg 2.0 kg 2.0 kg
SPECIFICATIONS
*Be sure to check the nameplate on product as it is subject to change by areas.
<Capacity with Angle attachment (Optional accessory for D13VF and D13VG)>
Model D13VF D13VG
Speed of angle unit LOW(650/min) HIGH(1350/min) LOW(400/min) HIGH(900/min)
Steel
Twist Bit 13 mm 13 mm 13 mm 13 mm
Hole Saw 64 mm 32 mm 70 mm 51 mm
Capacity Flat Spade Bit 40 mm 32 mm 40 mm 40 mm
Wood Auger Bit 38 mm 29 mm 38 mm 32 mm
Hole Saw 114 mm 64 mm 114 mm 102 mm
STANDARD ACCESSORIES
<D10VF>
(1) Chuck wrench (Spec. only for keyed chuck) ...... 1
<D10VG and D13VF>
(1) Side handle ................................................................ 1
(2)Chuck wrench (Spec. only for keyed chuck) ........ 1
<D13VG> <D13VF for Australia>
(1) Side handle ................................................................ 1
(2) Handle joint ................................................................ 1
(3) Chuck wrench (Spec. only for keyed chuck) ...... 1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
<D10VF>
(1) Side handle ................................................................ 1
(2) Hook (A) ..................................................................... 1
<D10VG>
(1) Hook (A) ..................................................................... 1
<D13VF and D13VG>
(1) Hook (A) ..................................................................... 1
(2) Angle attachment ...................................................... 1
Optional accessories are subject to change without notice.
APPLICATIONS
䡬 Boring holes in metal, wood, and plastic.
3. Do not wear gloves made of stuff liable to roll
up such as cotton, wool, cloth or string, etc.
4. Prior to drilling into walls, ceilings or floors, ensure
there are no electric cables or conduits inside.
01Eng_D10VF_US 7/10/11, 8:383
To Next Page
Loading...
Need help?
General
