LCD DISPLAY INFORMATION
When unit power on
• The unit is initialising, reading the disc's table of contents.
During initialise, display shows - -.
• If no disc is present, then disc is displayed.
Put the disc in and close the CD lid, then auto adjustment
starts again.
• If the CD lid is opened, display shows OPEN.
• If the unit cannot read disc's data then Er is displayed.
• When disc's data has been read, display shows total
number of tracks and total playing time for 1 second.
• Starts playing from track No. 1 automatically and shows
playing time of the track. ANTI-SHOCK starts flashing.
To play from stop condition
• Press PLAY/PAUSE button when disc is present,
then display changes to
01 00:00 and starts playing from
track no. 1 and shows playing time of the track.
ANTI-SHOCK starts flashing.
• When the anti-shock memory buffer is full,
ANTI-SHOCK stops flashing.
To stop
Press STOP button then total number of tracks and total
playing time is displayed.
To pause
Press PLAY/PAUSE button, then pause on/off alternately.
During pause condition, track timer display is flashing.
10
To Next Page
Loading...
