Hitachi DV 20V2 - Hammer Drill Accessories Guide; Standard Included Accessories; Optional Accessories for Purchase

Capacity
Steel
5/16" 1/2" 5/16" 3/8"
Concrete
3/8" 3/4" 3/8"
9/16"
Wood
1-3/8”
3/4"
1-3/8" 3/4" 1-3/8" 3/4" 15/16"
IMo-Load Impact Rate
17600
bpm
41600
bpm
17600
bpm
41600
bpm
17600
bpm
41600
bpm
41600
bpm
Weight (Without Cord) 5.1 lbs 5.1 lbs
5.1 lbs 4.2 lbs
* Be sure to check the nameplate on product as it is subject to change by areas.
ACCESSORIES
CAUTION:
Recommended accessories for this Electric Power Toot are mentioned in this manual.
The use of any other attachment or accessory might be hazardous.
STANDARD ACCESSORIES
(1) Chuck Wrench . 1
{2) Side Handle Ass'y . 1
(3) Depth Stopper . 1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
(1) Case
(2) Drill bit for concrete and stone
0-D. Length
Code No.
O.D. Length
Code No. O.D.
Length
Code No.
1/4" 4"
931851 3/8" 4-3/4" 931854 9/16" 6-5/16"
931776
5/16" 4”
_
931852 15/32" 6-5/16" 971704
5/8"
6-5/16” 971670
0.37" 4-3/4" 931853 1/2"
6-5/16" 931855
3/4"
6-5/16" 931856
Drill bit of more than 9/16" outer diam. cannot be attached to DV14V.
(3) Plus driver bit (Except DV20T)
Bit No.
Screw Size
Length
Code No.
No. 2 1/8"-3/16" 2-3/4" 955654
No. 3 1/4 "-5/16"
2-3/4"
955655
(4) Minus driver bit (Except DV20T)
a
Screw Size
Code No.
1/32" 5/32"
955659
3/64"
3/16"-1/4" 955674
Optional accessories are subject to change without notice.
6