26
Tips:
• If you load a DVD-RW that has already been
finalized, you can ‘Unfinalize’ it by choosing
Unfinalize from the Finalize menu. After doing this,
you can edit and re-record onto the disc.
• You cannot unfinalize a DVD-R and DVD+R disc.
• If [Disc Protect] option is set to [ON], the finalize is
not available. To finalize, set [Disc Protect] option to
[OFF].
Disc Label
Use this to enter a name for the disc. This name
appears when you load the disc and when you display
disc information on-screen.
• The disc name can be up to 32 characters long.
• For discs formatted on a different recorder, you will
see only a limited character set.
1. Select [Disc Label] option then press X.
2. Press ENTER while [Edit] is selected.
Keyboard menu appears.
To enter characters, see page 53.
Disc Protect
When recording in DVD-RAM/DVD+RW/+R disc or VR
mode formatted DVD-RW disc, set to [ON] to prevent
accidental recording, editing or deleting of the disc
loaded. If you need to unlock the disc to make edits,
select [OFF].
PBC
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
• [ON] Video CDs are played according to the PBC, if
available.
• [OFF] Video CDs are played the same way as Audio
CDs.
To Next Page
Loading...