43
Recording
2. Enter the necessary information for your timer
recording(s).
• W / X (left/right) – move the cursor left/right
• S / T (up/down) – change the setting at the
current cursor position
• Press RETURN ( ) to exit the Timer Record
menu.
• Press ENTER after filling in all the program
information.
• Press TIMER REC to display Timer Record List.
3. Set a recording mode as necessary by pressing
REC MODE repeatedly. (XP, SP, LP, EP)
4. Press ENTER, the program will be memorized by
the recorder.
To check the programming, the Timer Record List
will appear.
Check field’s “Rec. OK” or “OK” on the Timer
Record List indicates that the timer recording is
programmed correctly.
5. Press RETURN ( ) to exit the Program List.
6. Make sure that you load a recordable disc for DVD
recording and press POWER to switch your unit to
Standby.
For HDD recording, also press POWER to set the
recorder to the standby status.
Notes:
• You must press POWER to stop the timer recording.
• The timer indicator lights in the display window when
the recorder is in standby with the timer active.
• For TV recording with bilingual, set audio channel
from the [TV Rec Audio] in sub-menu of the Setup
menu (see page 24).
• If you set a timer recording to record to DVD but there
isn’t a recordable DVD loaded at the time of the
recording, the Recovery Recording feature will
automatically record the program to the HDD for you.
• Using the HDD allows you to record a maximum of
12 hours continuously.
To Next Page
Loading...