--- 7 ---
7. PRECAUTIONS IN SALES PROMOTION
In the interest of promoting the safest and most efficient use of the Model FDV 16VB2 Impact Drill by all of our
customers, it is very important that at the time of sales the salesperson carefully ensures that the buyer seriously
recognizes the importance of the contents of the Handling Instructions, and fully understands the meaning of the
precautions listed on the Caution Plate attached to each tool.
7-1. Handling Instructions
Although every effort is made in each step of design, manufacture and inspection to provide protection against
safety hazards, the dangers inherent in the use of any electric power tool cannot be completely eliminated.
Accordingly, general precautions and suggestions for the use of electric power tools, and specific precautions
and suggestions for the use of the drills are listed in the Handling Instructions to enhance the safe, efficient use of
the tool by the customer. Salespersons must be thoroughly familiar with the contents of the Handling Instructions
to be able to offer appropriate guidance to the customer during sales promotion.
7-2. Caution Plate
The following basic safety precautions are listed on the Caution Plate attached to the main body of each tool.
(1) For Oceania and Asia
These precautions are not listed on the Name Plates of the products destined for Europe.
(2) For the U.S.A. and Canada
7-3. Precautions in Usage
(1) Direction of rotation
The bit rotates clockwise (viewed from the rear side) by
pushing the R-side of the pushing button.
The L-side of the pushing button is pushed to turn the bit
counterclockwise.
mark
Pushing button
L
R
mark
Switch trigger
Never change the direction of bit rotation while operating. Turn the power switch OFF before changing the
direction of bit rotation: otherwise, burning of the motor will result. Always use the impact drill with clockwise
rotation, when using it as an impact drill.
R
L
To Next Page
Loading...
Need help?
General
