EN-32
AE Flicker
This camera supports different lighting frequencies: 50 Hz and 60 Hz. When photo-
graphing under fluorescent lighting, select the correct frequency setting depending in
your local area's voltage. This function is only effective if you set the White Balance to
Fluorescent setting.
* 50Hz / 60Hz
Sys. Reset
This returns all basic settings to the camera’s default settings. The time setting will not
be reset.
* Cancel / Execute
Format
Refer to section in this manual titled “Formatting the Memory Card or Internal Mem-
ory” for further details.
Card Info.
This displays the free capacity of the internal memory or the memory card.
System Info.
This displays the firmware version of the camera.
To Next Page
