Ä8
FITTING BATTERIES IN YOUR REMOTE CONTROL
First open the battery cover on the underside of the remote control. Fit both batteries 1.5Volt (R03/AAA)
referring to the imprinted symbols (+/-) in the battery case and put on the battery cover again.
While using the remote control, direct it towards the front of the AV receiver. If the remote control does
not work or the chosen function could not be made, the batteries are most probably exhausted and they
should be replaced as soon as possible. Please use only the leak proof batteries. If you will not be using
your remote control for a long time, it is recommended to take out the batteries from your remote control
to avoid possible damage from battery leakage and corrosion. Do not leave the remote in an extremely
hot or humid place.
To Next Page
Loading...
