Deskstar 7K160 Hard Disk Drive Specification
140
Feature Previous The default Command Completion Time Limit (CCTL).
The value is calculated as follows:
(Default CCTL) = ((content of the Features register)*
(Identify Device words (99:98))) micriseconds.
This time shall be used by the device when a streaming
command with the same stream ID and a CCTL of zero
are issued. The time is measured from the write of the
command register to the final INTRQ for command
completion.
Sector Count Current Allocation Unit Size In Sectors (7:0)
Sector Count Previous Allocation Unit Size In Sectors (15:8)
Feature Current bit 7 (A/R) If set to one, a request to add a new stream.
If cleared to
zero, a request to remove a previous configured stream is
specified.
To Next Page
Loading...
