EasyManua.ls Logo

Hitachi HTS541616J9SA00 - User Manual

Hitachi HTS541616J9SA00
167 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Travelstar 5K160 (SATA) Hard Disk Drive Specification
1/167
Hitachi Global Storage Technologies
Hard Disk Drive Specification
Hitachi Travelstar 5K160
2.5 inch SATA hard disk drive
Models: HTS541616J9SA00
HTS541612J9SA00
HTS541680J9SA00
HTS541660J9SA00
HTS541640J9SA00
Revision 1.2 12 July 2006

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Hitachi HTS541616J9SA00 and is the answer not in the manual?

Hitachi HTS541616J9SA00 Specifications

General IconGeneral
BrandHitachi
ModelHTS541616J9SA00
CategoryStorage
LanguageEnglish

Summary

1 Introduction

4 Fixed disk characteristics

4.4 Performance characteristics

Details key performance parameters of the hard disk drive.

5 Data integrity

5.1 Data loss on power off

Explains potential data loss scenarios during power off events.

5.2 Write Cache

Details the function and implications of the write cache feature.

5.6 Error recovery

Explains the error recovery procedures implemented by the drive.

6 Specification

6.1 Environment

Specifies operating and non-operating environmental conditions like temperature and humidity.

6.2 DC power requirements

Lists the necessary DC voltage, ripple, and current specifications.

6.3 Reliability

Discusses data reliability, failure prediction, and cable noise interference.

6.4 Mechanical specifications

Covers physical dimensions, weight, and mounting details.

6.5 Vibration and shock

6.5.3 Operating shock

Specifies shock resistance while the drive is operating.

6.5.4 Nonoperating shock

Specifies shock resistance when the drive is not operating.

6.9 Safety

6.9.5 Secondary circuit protection

Addresses the need for secondary over-current protection.

7 Electrical interface specifications

7.3 Signal definitions

Lists pin assignments and definitions for interface signals.

11 Registers

12 General Operation Descriptions

12.1 Reset Response

Details responses to Power On, COMRESET, and Software Reset.

12.3 Power-off considerations

Covers important factors during power-off.

12.3.3 Required power-off sequence

Specifies the essential sequence for safe power removal.

12.5 Power Management Feature

12.6 Advanced Power Management (Adaptive Battery Life Extender 3) Feature

12.8 S.M.A.R.T. Function

12.9 Security Mode Feature Set

12.9.1.3 User Password Lost

12.10 Protected Area Function

12.12 Write Cache Function

12.14 48-bit Address Feature Set

12.15 Software Setting Preservation Feature Set

12.16 Native Command Queuing

13 Command Protocol

14 Command Descriptions

14.13 Read DMA(C8 h;C9 h)

14.14 Read DMA Ext (25 h)

14.15 Read FPDMA Queued (60 h)

14.20 Read Native Max Address (F8 h)

14.21 Read Native Max Address Ext (27 h)

14.22 Read Sector(s) (20 h;21 h)

14.23 Read Sector(s) Ext (24 h)

14.24 Read Verify Sector(s) (40 h;41 h)

14.25 Read Verify Sector(s) Ext (42 h)

14.27 Security Disable Password (F6 h)

14.28 Security Erase Prepare (F3 h)

14.29 Security Erase Unit (F4 h)

14.30 Security Freeze Lock (F5 h)

14.31 Security Set Password (F1 h)

14.32 Security Unlock (F2 h)

14.35 Set Features (EFh)

14.36 Set Max Address (F9 h)

14.37 Set Max Address Ext (37 h)

14.39 Sleep (E6 h;99 h)

14.40 S.M.A.R.T. Function Set (B0 h)

14.44 Write DMA (CAh;CBh)

14.45 Write DMA Ext (35 h)

14.46 Write DMA FUA Ext (3 Dh)

14.47 Write FPDMA Queued (61 h)

14.53 Write Sector(s) (30 h;31 h)

14.54 Write Sector(s) Ext (34 h)

15 Timings

Related product manuals