Deskstar 7K160 Hard Disk Drive Specification
151
Input parameters from the device
Sector Number In LBA mode this register specifies the current LBA address bits as 0–7 (L = 1).
Cylinder High/Low In LBA mode this register specifies the current LBA address bits as 8–15 (Low) and bits
16–23 (High).
H In LBA mode this register specifies the current LBA address bits as 24–27 (L=1).
Error The Error Register. An Abort error (ABT=1) will be returned when LBA is out of range
In LBA mode this command formats a single logical track including the specified LBA.
To Next Page
Loading...
