Table 9-96 SSB codes returned by raidcom modify port -iscsi_virtual_port_mode
raidcom modify port -iscsi_virtual_port_mode
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 8400 The value of the specified port is invalid.
CMDRJE Executing 2E11 800F The operation failed because multiple versions of
DKCMAIN microcode are included.
CMDRJE Executing 2E11 8010 The storage system is in internal process, or the
configuration changing processes are conflicting.
CMDRJE Executing 2E11 810A Abnormal cache status.
CMDRJE Executing 2E11 8403 The operation cannot be performed because iSNS
is set for the specified port or a port of the same
group.
CMDRJE Executing 2E11 8404 The operation cannot be performed because a
virtual port is registered for the specified port or a
port of the same group.
CMDRJE Executing 2E20 8400 The specified port is not installed.
CMDRJE Executing 2E31 8301 The specified port is not a port of the package for
iSCSI.
CMDRJE Executing 2E3F 8000 The specified operation is not supported in the
current microcode version.
CMDRJE Executing 2ED0 FEEC An internal error occurred.
Table 9-97 SSB codes returned by raidcom delete host_grp
raidcom delete host_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B956 302C The host group cannot be deleted because the host
mode option 61 or 72 is set.
CMDRJE Executing B956 304F The program product is not installed.
CMDRJE Executing B956 3071 The value of host group ID exceeds the maximum.
CMDRJE Executing B956 3077 The attribute of the specified port is Initiator or
External.
CMDRJE Executing B956 30FD The attribute of the specified port is Initiator or
External.
CMDRJE Executing B956 3200 An internal error occurred.
CMDRJE Executing B956 3201 The specified LDEV is used as a reserved volume of
Volume Migration.
9-146
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
