Hitachi L26A01 User Manual

- 10 -
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power cord to the system. Press Power
On/Off switch. Then the TV switches itself to
stand-by mode (optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the "-P/CH"
or "
P/CH+" button on the TV or press the P+ or P-
button on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on.
To switch the TV off:
• Press the “ (stand-by)” button on the remote con-
trol or On/Off switch on the TV, so the TV will switch
to stand-by mode.
To power down the TV completely, press On/Off
switch
or,
Unplug the power cord from the mains socket.
Navigating the Menu System
MENU
GUIDE
RETURN
OK
+
For Displaying
Menu Options
For Navigation
To Confirm Choices
1- Press to display the menu.
2- Press
_
/
`
button to select an icon.
3- Use
a
/
b
button to highlight. Press
`
for more
options in analogue TV mode. Use OK in DTV mode
for viewing a submenu.
4- Press
_
/
`
buttons to change the settings. Press
OK to set as default.
5- To exit the menu or return from sub-menu screen,
press
.
These explanations are available for the navigation
of the whole menu system. To select options that are
explained in the following parts, refer to “Navigating
The Menu System”.
Initial Settings
When the TV is turned on for the first time, Auto
Programme menu will be displayed on the screen
Because this is the first time the TV is used, there are no
channels stored in the memory and the following message
appears on the screen.
Country
Language
UK
Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
TXT Language
Auto Program
By pressing or button, adjust the Country item
and press
to highlight “Language” item. Use
or button to set “Language”. Use or but-
tons to select “TXT Language” and set it by using
or buttons. Press “OK” button to continue:
For more information on this process, see “
Install
Menu” section.
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the buttons on the TV
Volume Setting
• Press - button to decrease volume or +
button to increase volume, so a volume level scale
(slider) will be displayed at the middle of the bottom
on the screen.
Programme Selection
• Press P/CH + button to select the next programme or
P/CH - button to select the previous programme.
Entering Main Menu
• Press the MENU button to enter Main menu. In the
Main menu select sub-menu using P/CH - or P/CH +
buttons and enter the sub-menu using
- or
+ buttons. To learn the usage of the menus, refer to
the Menu System sections.

Hitachi L26A01 Specifications

General

Brand	Hitachi
Model	L26A01
Category	TV
Language	English