On-Screen Display
Audio
Sound Mode
Bass
Treble
Balance
Audio Source
Audio Language
Digital Output
Internal Speakers
Perfect Volume
SRS TruSurround HD
Reset
Selects 4 audio presets (Custom,Standard, Movie, News)
Adjust the intensity of low frequencies.
Adjust the intensity of high frequencies.
Adjust the balance.
Select between three Audio Sources (Stereo, Mono, SAP).
Select Language options if available.
Select Optical Output options.
Select internal or external speaker.
Adjust volume to be closer in level between channels.
Select Surround settings (Off, On)
Resets all Audio settings the original condition
The Audio Language and Digital
Output of the Audio OSD are only
available for Digital channels.
Setup
Menu Language
Time
Sleep Timer
Set Password
Parental Controls
Closed Captions
Digital Captions
Digital Captions Options
Analog Captions
Energy Options
Transparency
HDMI-CEC
Input Labels
Component Options
RGB Options
Reset AV & Setup
Choose English, French or Spanish OSD Language.
Set Clock Settings.
Set Sleep Timer intervals (5 minutes ~ 4 hours).
Set the password for the Parental control access.
Ratings system to block various types of programs.
Feature to turn On/Off closed captions.
Feature to display DIGITAL dialogue/text.
Feature to change the appearance of the DIGITAL CAPTIONS.
Feature to display ANALOG dialogue/text.
Select Power Consumption Savings options.
Feature to change the OSD Menu transparency.
Set to ON, this feature will enable simplified operation of compatible HDMI CEC components.
Label Video Inputs, VCR, DVD, etc.
Adjust the Phase and applies Reset to any adjustments made.
Adjust Horizontal Position, Vertical Position, Clock, Phase and Reset.
Resets all Audio, Video and Setup settings to the original condition.
Channels
Source
Signal Strength
New Channel Scan
Add Channels to List
Channels List
Channels Labels
Favorite Channels
Selects the type of signal to be used Cable or Air.
Access Signal Meter.
Set Auto Channel Scan.
Adds Channels to the List (Scanned channels remain the same until New Channel Scan is performed).
Set Channel List.
Set Labels on the channels. The Signal Strength feature of the
Set the favorite channels. Channels OSD is only available for
Digital (D TV) channels.
23
To Next Page
Loading...
Need help?
General
