Hitachi L32A403 User Manual

How to Use the Remote to Contro| your TV
Closed Captioning will display automatically when MUTE is on
and Closed Caption is set to With Mute (see page 30).
When the TV power is turned off at a volume level 16 or greater,
the volume level will default to 15 when the TV is turned on.
However, if it is set to a level 15 or less, the volume level will
be at the level it was set when the TV is turned off.
VIDEO iNPUTS
O E.SAVE (ENERGY SAVE) button
Use this button to choose power consumption reduction
settings based on 3 levels (MIN., MEDIUM, MAX).
O
O
@
O
CLOSED CAPTIONS (CC) button
Use this button to display the dialogue, narration, and/
or sound effects of a television program or home video
which are displayed on the TV screen when available.
Your local TV program guide denotes these programs
as D or [_.
MENU button
The MENU button will start the On-Screen Display.
EXIT button
This button will exit all On-Screen Displays.
CURSOR Pad/SELECT button
All the On-Screen Display features can be set or adjusted
by using the CURSOR Pad and the SELECT button, except
for numeric entries. Press the CURSOR Pad toward desired
direction and press the SELECT button to select.
Program information
• Press the INFO button again or the EXIT button to
return to normal viewing.
• The Aspect INFO will not be shown when the INFO
key is pressed.
@ INPUT button
Press this button to access the INPUTS menu. Use the CURSOR
and SELECT buttons to scroll and select the inputs that are being
used. Pressing the INPUT button repeatedly will also cycle through
the Inputs menu items. Then press the SELECT button or wait 4
seconds to automatically select the highlighted input.
O INFO button
Press this button when you want to check the channel being
received, the picture source, if the channel has stereo (ST) or
second audio program (SAP), the time, and CHANNEL ID.
ANALOG CHANNELS
Program Information
DIGITAL CHANNELS
0. TV
I.AVI
2. AV2
3. Component1
4. Component2
5. RGB
6. HDMI 1
7. HDMI 2
8. HDMI 3
9. HDMI 4
Watch TV from an Air or Cable signal.
Select to choose AVl Input
Select to choose AV2 Input.
Select to choose Component Input I.
Select to choose Component Input 2.
Select to choose PC input.
Select to choose HDMI 1 Input.
Select to choose HDMI 2 Input.
Select to choose Side HDMI 3 Input.
Select to choose Side HDMI 4 Input.
_) SLEEP button
Press this button to set the Sleep Timer from 5 minutes to 4
hours.
Program hTformation Program Picture Format
Run Time
19

Hitachi L32A403 Specifications

General

Brand	Hitachi
Model	L32A403
Category	HDTV
Language	English