Hitachi N 3804AB3 User Manual

N 3804AB3
Model Stapler
DANGER
Improper use of this Stapler can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Stapler.
Keep this Manual available for others before they use the Stapler.
Never allow anyone who has not reviewed this manual.
Instruction and safety manual
01Eng_N3804AB3_Eng 10/4/07, 19:501

Hitachi N 3804AB3 Specifications

General

Brand	Hitachi
Model	N 3804AB3
Category	Power Tool
Language	English

Summary

Safety Fundamentals

Signal Word Definitions

Explains DANGER, WARNING, CAUTION, and NOTE symbols used in the manual.

Nailing Mechanism Explanations

Details single, contact, and full sequential actuation methods for driving fasteners.

Essential Safety Guidelines

General Safety Instructions

Covers operator and bystander safety, tool handling, and environmental hazards.

Specific Hazard Warnings

Details DANGER and WARNING points like eye protection, air supply, and trigger usage.

Advanced Safety and Responsibilities

Continued Safety Instructions

Further safety rules including dress code, coupler use, and overreaching.

Employer's Safety Responsibilities

Outlines employer duties for safe stapler operation and maintenance.

Stapler Overview and Setup

Component Identification

Identifies and illustrates all major parts of the stapler.

Specifications and Accessories

Lists technical specs, compatible staples, and standard accessories.

Operational Preparation

Applications, Environment, and Air

Covers uses, workspace safety, and air supply requirements including FRL units.

Lubrication and Cold Weather Care

Explains proper lubrication and handling the stapler in cold environments.

Pre-Use Testing and Adjustments

Stapler Testing Procedures

Step-by-step checklist to ensure proper stapler function before use.

Air Pressure and Staple Loading

Guides on setting optimal air pressure and safely loading staples.

Stapler Usage and Methods

Stapler Operation Modes

Explains single, contact, and full sequential actuation mechanisms.

Firing Methods and Depth Control

Details intermittent/continuous firing and stapling depth adjustment.

Maintenance and Servicing

Operational Adjustments

Procedures for changing exhaust direction and handling the nose cap.

Troubleshooting and Storage

Guides for clearing jams, proper storage, and service.