Hitachi NT65M2 - to 2-1 16 Gauge Finish Nailer User Manual

DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual.
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner
la mort ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Ne jamais laisser les personnes n'ayant pas étutdié le manuel utiliser l'outil.
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias
o en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el clavador.
No deje manejar esta herramienta a nadie que no haya leído este manual.
Model Finish Nailer
Modèle Cloueur de finition
Modelo Clavadora de acabado
NT 65M2
Instruction and safety manual
Manuel d'instructions et de sécurité
Instrucciones y manual de seguridad

Hitachi NT65M2 - to 2-1 16 Gauge Finish Nailer Specifications

General

Type	Finish Nailer
Gauge	16 Gauge
Power Source	Pneumatic
Operating Pressure	70 - 120 PSI
Magazine Capacity	100 nails
Weight	3.7 lbs
Nail Length	1 inch to 2-1/2 inches

Summary

IMPORTANT SAFETY INFORMATION

DEFINITIONS OF SIGNAL WORDS

Explains DANGER, WARNING, CAUTION, NOTE signal words for hazard communication.

EXPLANATION OF THE NAILING ACTION

Details the two nailing mechanisms: Single Actuation and Contact Actuation.

SAFETY

IMPORTANT SAFETY INSTRUCTIONS FOR USING NAILERS

Provides critical safety instructions for operating the nailer, covering personal protection and tool usage.

EMPLOYER'S RESPONSIBILITIES

OPERATION

NAME OF PARTS

Identifies and illustrates the various components of the nailer.

SPECIFICATIONS

Lists technical specifications for the nailer, including pressure, dimensions, and capacity.

NAIL SELECTION

Details the type and dimensions of nails compatible with the nailer.

ACCESSORIES

Lists standard and optional accessories available for the nailer.

APPLICATIONS

Describes typical uses and applications for the nailer.

BEFORE OPERATION

Instructs users to review safety guidelines and make preparations before operating the tool.

WORKING ENVIRONMENT

Specifies requirements for a safe and suitable working environment.

AIR SUPPLY

Details requirements for the compressed air power source and filtering/regulating systems.

LUBRICATION

Explains the importance and method of lubricating the nailer for proper function and longevity.

COLD WEATHER CARE

Provides instructions for using the nailer in cold weather conditions.

TESTING THE NAILER

Outlines a pre-operation checklist and testing procedure to ensure the nailer functions correctly.

ADJUSTING AIR PRESSURE

Explains how to set the correct air pressure for optimal and safe nailer operation.

LOADING NAILS

Provides step-by-step instructions for safely loading nails into the nailer.

NAILER OPERATION

General guidance on how to operate the nailer safely.

METHODS OF OPERATION

Explains the two primary methods for driving nails: intermittent and continuous operation.

ADJUSTING THE NAILING DEPTH

Details the procedure for adjusting the nail depth for proper penetration.

USING THE BLOW NOZZLE

Instructions for using the blow nozzle feature to clear debris.

CHANGING THE EXHAUST DIRECTION

Explains how to adjust the direction of the exhaust vent.

USING THE NOSE CAP

Instructions for attaching and using the nose cap to protect surfaces.

MAINTENANCE

MAINTENANCE AND INSPECTION

Covers routine maintenance tasks and inspections to ensure proper tool function.

Storing

Instructions for storing the nailer properly when not in use, including rust prevention.

SERVICE AND REPAIRS

Provides guidelines for servicing and repairing the nailer.

Maintenance chart

A table detailing maintenance actions, their purpose, and the method to perform them.

Operator troubleshooting

A table listing common problems, their check methods, and solutions.