To Next PageTo Next Page
Need help?Do you have a question about the Hitachi NT65GS and is the answer not in the manual?
Ensuring a clean, well-lit, and safe work environment to prevent accidents.
Maintaining alertness, proper footing, and common sense during tool operation.
Guidelines for handling battery-powered tools, including liquid ejection precautions.
General advice on correct tool usage, maintenance, and avoiding hazards.
Guidelines for correct tool usage, caution regarding ignition, and explosion hazards.
Mandatory use of eye protection, ear protection, and head protection.
Ensuring a safe environment, paying attention to others, and not pointing the tool at people.
Precautions on push lever, nails, trigger, kickback, and general usage.
Warnings and guidelines for charging, using, and storing batteries and chargers.
Safety measures related to fuel cells, including handling and storage.
Technical specifications for the NT65GS and NT65GB gas finish nailer models.
Technical specifications for the NT50GS gas brad nailer model.
Specifications for the UC3SML battery charger unit.
Specifications and dimensions for 16 Gauge finish nails for NT65GS.
Specifications and dimensions for 16 Gauge finish nails (20° angle) for NT65GB.
Specifications and dimensions for 18 Gauge brad nails for NT50GS.
Details on included standard accessories and available optional items.
Common use cases for different nailer models (NT65GS, NT65GB, NT50GS).
Steps for charging the battery and important safety warnings.
Tips for battery longevity and understanding indicator light meanings.
Essential safety checks and procedures before starting the tool.
Instructions for attaching and verifying the fuel cell for proper operation.
Procedures for loading nail strips into the magazine for different models.
Instructions on how to remove nails from the nailer.
Explanation of the battery indicator light states and their meanings.
Detailed steps for intermittent nailing and using the push lever.
Procedure for adjusting the nail depth for consistent penetration.
Instructions for installing and using the hook and protective nose cap.
Steps to clear jammed nails and prevent future occurrences.
Procedures for cleaning, lubricating, and checking the magazine and push lever.
Checking screws, replacing fuses, and proper tool storage.
Provides noise (LwA, LpA) and vibration (2.1 m/s²) values per standards.
Information on obtaining service parts and recommended lubricants.
Addresses issues like jams, feeder problems, or improper nail use.
Troubleshooting bent nails, smooth push lever operation, and unstable driving.
Diagnosing issues like no operation with a green light or battery charging failures.
General