Need help?Do you have a question about the Hitachi NV 83A and is the answer not in the manual?
General| Type | Framing Nailer |
|---|---|
| Weight | 7.7 lbs |
| Operating Pressure | 70 - 120 PSI |
| Power Source | Pneumatic |
| Fastener Type | Wire Weld Collated Nails, Plastic Collated Nails |
| Magazine Capacity | 70 nails |
| Fastener Length | 2 in - 3-1/4 in |
| Firing Mode | Contact actuation |
Crucial safety guidelines for operating pneumatic nailers to prevent serious injury and equipment damage.
Specific safety precautions tailored for Hitachi NV83A, NV65AC, and NV50A1 coil nailer models.
Technical details including operating pressure, dimensions, weight, and air consumption for each nailer model.
Requirements for the compressed air source, including pressure, quality, and connection type.
How to set the correct air pressure based on nail length and workpiece hardness for optimal performance.
General guidance on safe nailer operation, including warnings and handling procedures.
Explains the two operational modes: intermittent (trigger fire) and continuous (push lever fire).
To Next Page
