Hitachi NV 83A4 User Manual

Instruction and safety manual
Manuel d’instructions et de sécurité
Instrucciones y manual de seguridad
Model
Modèle
Modelo
NV 83A4
Nailer
Cloueur
Clavador
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual to use the tool.
This manual should be stored in safe place.
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner la
mort ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Cet outil ne doit jamais être utilisé par une personne n’ayant pas pris connaissance du
manuel.
Ce mode d’emploi doit être conservé dans un endroit sûr.
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias o
en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el martillo neumático.
La herramienta no deberá utilizarse sin haber leído previamente este manual.
Este manual debe ser guardado en un lugar seguro.
000CoverNV83A4US.indd1000CoverNV83A4US.indd1 2013/06/1111:02:002013/06/1111:02:00

Hitachi NV 83A4 Specifications

General

Power Source	Pneumatic
Operating Pressure	70-120 PSI
Nail Length	2 to 3-1/4 inches
Nail Diameter	0.099 to 0.131 inches
Magazine Capacity	300 nails
Firing Mode	Contact trip
Fastener Type	Plastic and wire collated nails

Summary

Important Safety Information

Nailer Safety

Safety Instructions for Nailer Use

Provides essential safety instructions for operating Hitachi nailers, covering risks and precautions.

Employer Responsibilities

Operation Overview

Name of Parts

Nailer Specifications

Nail Selection

Details the types and sizes of nails compatible with the NV83A4 nailer.

Pre-Operation Procedures

Air Supply Requirements

Details on air source, filter-regulator-lubricator, and air hose specifications.

Nailer Testing and Maintenance Prep

Nailer Lubrication

Adjusting Nailer Air Pressure

Nailer Operational Modes

Methods of Operation

Explains the two primary operational modes: intermittent and continuous firing.

Adjusting Nailing Depth

Nailer Maintenance and Inspection

Clearing Nailer Jams