Hitachi NV 90AG S User Manual

Instruction and safety manual
Manuel d’instructions et de sécurité
Instrucciones y manual de seguridad
Model
Modèle
Modelo
NV 90AG (S)
Nailer
Cloueur
Clavador
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual.
This manual should be stored in safe place.
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner la
mort ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Ne jamais laisser les personnes n’ayant pas étutdié le manuel utiliser l’outil.
Ce mode d’emploi doit être conservé dans un endroit sûr.
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias o
en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el martillo neumático.
No deje manejar esta herramienta a nadie que no haya leído este manual.
Este manual debe ser guardado en un lugar seguro.
000BookNV90AG(S).indb1000BookNV90AG(S).indb1 2015/07/0210:35:462015/07/0210:35:46

Hitachi NV 90AG S Specifications

General

Magazine Capacity	64 - 70 nails
Operating Pressure	70 - 120 psi
Type	Pneumatic
Fastener Type	Nail
Nail Size	2" - 3-1/2"
Nail Length	2" - 3-1/2"
Nail Diameter	0.113" - 0.148"
Magazine Angle	21°
Firing Mode	Contact actuation
Weight	7.5 lbs

Summary

Important Safety Information

Definitions of Signal Words

Explains the meaning of signal words like DANGER, WARNING, CAUTION, and NOTE used in the manual.

Nailing Action Explanation

Describes the two nailing mechanisms: Single Sequential and Contact Actuation.

Safety Instructions

General Safety Rules

Covers essential safety warnings like eye protection, avoiding accidental firing, and proper tool handling.

Work Area and Personal Safety

Guidelines for maintaining a safe work environment and personal precautions.

Nailer Use, Service, and Air Supply

Covers safe nailer operation, maintenance, air source requirements, and general warnings.

Employer's Responsibilities

Outlines employer's duties regarding nailer safety and manual availability.

Operation

Name of Parts

Identifies and illustrates the different components of the nailer.

Specifications and Nail Selection

Details the nailer's technical specifications and guidelines for selecting appropriate nails.

Accessories, Applications, and Pre-Operation

Lists accessories, applications, and before-operation checks including working environment.

Air Supply and Testing

Information on air supply requirements and procedures for testing the nailer.

Adjusting Air Pressure

Guidance on setting the correct air pressure for the nailer's operation.

Loading Nails

Step-by-step instructions for safely and correctly loading nails into the magazine.

Nailer Operation Methods

Explains the two primary nailing modes: Single Sequential and Continuous.

Depth Adjustment and Nose Cap

Instructions for adjusting nail depth and using the protective nose cap.

Maintenance and Repairs

Maintenance and Inspection Procedures

Step-by-step guide for cleaning, inspecting components, and general maintenance.

Service and Repair Guidelines

Information on who should perform repairs and the use of genuine parts.

Troubleshooting and Maintenance Chart

Common problems, their solutions, and a daily maintenance action chart.