TheFRONTpaneljacksareprovidedasaconveniencetoallowyoutoeasilyconnectacamcorder,DVD,Video
GameandaVCRasshowninthefollowingexamples:
/
UF_RADE CARD
(SERVICE USE ONLY} • •
FRONTINPUTPANEL
f
OUTPUT I
000 00
N=UT < VOL _ • CH • PO_
,S_cr _T L_CO_S_ _
COMPOSITE VIDEO
Video Game OUTPUT CAPABILITY
DVD, Video Game
Console.
Video Camera
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set
Top Box to your Plasma TV is dependent on the model and features of each component. Check the
owner's manual of each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to
accommodate your particular assortment of components and features. For best performance, video and
audio cables should be made from coaxial shielded wire.
Before Operating External Video Source
Connect an external source to one of the INPUT terminals, then press the INPUTS button to show the
INPUTS menu. Use the CURSOR PAD (A and V) to select the Input of your choice. Then press
the SELECT button or the CURSOR PAD 1_to confirm your choice (see page 26).
16
To Next Page
Loading...
