To Next PageTo Next Page
Need help?Do you have a question about the Hitachi P50T01E and is the answer not in the manual?
General| Depth | 128 mm |
|---|---|
| Height | 821 mm |
| Weight | 41000 g |
| Pixel pitch | 0.86 x 0.58 mm |
| Certification | Safety, EMI, CE |
| Product color | Black |
| Audio (L/R) in | 1 |
| RMS rated power | 20 W |
| Display diagonal | 50 \ |
| Display language | ENG / GER / FRE / SP / IT / SWE / NOR / FIN / DAN / DUT / GRE / CZ / POL / HUN |
| Channels quantity | 200 channels |
| Depth (with stand) | 423 mm |
| Display brightness | 1300 cd/m² |
| Display resolution | 1024 x 1080 pixels |
| Display technology | Plasma |
| Width (with stand) | 1240 mm |
| Height (with stand) | 882 mm |
| Weight (with stand) | 47000 g |
| SCART ports quantity | 3 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Compatible memory cards | SD |
| Contrast ratio (typical) | - |
| Power consumption (standby) | 0.8 W |
| Power consumption (typical) | 451 W |
Essential safety rules, warnings, and procedures for safe operation and servicing.
Guidelines for cleaning the screen and cabinet to prevent damage.
Instructions for proper disposal of electronic equipment according to EU regulations.
Details on the large-screen plasma panel and high-performance digital processor.
Information on various input terminals like AV, HDMI, and SD card slot.
Guidance on using lead-free solder, including properties and precautions.
Procedures for readjusting power supply voltages after component changes.
Identifies main components on the front, rear, and control panels.
Step-by-step guide for connecting external devices to the TV.
How to enter and navigate the service adjustment mode.
Steps for memory initialization and factory reset.
Specific procedures for adjusting Vs and Va voltages on the power unit.
Adjusting RGB amplitude for AV component and 480p/480i inputs.
Calibrating video colour temperature to 'Cool' and 'Normal' settings.
Calibrating video colour temperature to 'Warm' and 'B&W' settings.
Using burn-in mode for panel failure diagnosis via power LED blinking.
Step-by-step guides for diagnosing picture signal issues.
Diagnosing issues with RF, composite, and S-video input signals.
Troubleshooting steps for RGB and component video signal problems.
Diagnosing issues related to DTT and HDMI inputs.
Resolving problems with sub-picture display and teletext functionality.
Guides for resolving issues with USB, SD card, and swivel stand functionality.
Troubleshooting sound issues based on input type, including analog and digital.
Panel failure diagnosis via power LED blinking.
Table of error codes and their meanings for self-diagnosis.
Schematic showing internal wiring connections and styling.
Second part of the wiring schematic detailing internal connections.
Visual guides for disassembling and reassembling the unit's main parts.
Illustrates expected signal waveforms at various test points for troubleshooting.
