Hitachi P50H4011 - 42 Models Wall Mount Preparation

SETTING FOR WALL MOUNTING ON 42" MODELS
STEP (1) :
Please locate the STAND METAL on the back of the TV. This metal is use to hold the TV and the Base ; so it needs
to remove 6 screws from the STAND base in order to separate the TV from the Base.
STAND METAL
STEP (2):
Please remove the2 screws ofthe STAND metalfrom the -iV,then remove 4 screws thathold the IV STAND BASE;
now theIV STAND can be separatedfrom the-iV.FordimensionsoftheWALL MOUNT assembly pleaserefertopage 60.
STAND METAL
2 SCREWS
Remove these 2 screws
first to separate the TV
from the stand metal.
Then put these 2 screws
back to the TV.
SSSSS_
Remove these 4 screws
t
TV STAND BASE
to separate the TV from
the stand base.