Hitachi PSC-A128EX3 - Installing Remote Access Software

1. InserttheSDmemorycardof
Remote Access software into
theSDmemorycarddriveofthe
PCpreparedforRemoteAccess
software.Right-click“installer.exe”,
andclick“Runasadministrator”.
2. Clickthe[Next]buttontoinstallthe
softwareonthePC.
3. Selecttheinputboxandenterthe
serialcode.
●Theserialcodeis“60292296”.
4. Clickthe[Next]button.
5.1 Installation
5.1.1 InstallingRemoteAccesssoftware
5. Setup
1
2
Continuetonextpage.
3
4
16
A12124920A