Hitachi PSC-A32MN - Page 103


Contact Information Registration
Contact information can be registered from “Contact Information”.
1 Press and hold “
” (menu) and “ ” (return) simultaneously for at least 3 seconds during the normal mode (when unit
is not operated). The test run menu is displayed then.
2 Select “Contact Information” from the test run menu and press “OK”. The contact information 1 is displayed then.
3 Press “?” (help) to change font type.
Contact Information 1
OK
?
'
1
q
€
<
+
2
w
a
>
*
3
e
s
z
;
4
r
d
x
.
5
t
f
c
?
6
y
g
v
←→
-
7
u
h
b
/
8
i
:
9
o
k
m
j
n
l
,
=
0
p
ABC
abc
Sym.1
Sym.2
SPAC DEL FIN.
ENT. FIN.SEL. Letter
4 Press “ ” to select letter.
5 Press “OK” to conrm the letter. (Max.: 28 letters)
6 Select “FIN.”, press “OK” (or simply press “
” (menu)) and the step
7 is displayed.
7 Repeat steps 3~5 to register contact information 2.
Select “FIN.” and press “OK”, then the conrmation screen is displayed. (or simply press “
” (menu)).
8 Select “Yes” and press “OK”. The test run menu is displayed after the
setting is conrmed. If “No” is pressed, the screen returns to step 3.
OK
Contact Information
Save changes?
Yes No
ENT
.R
TN.SEL.
Electric Corp.
4 Individual remote controls
PC-ARF
TCGB0106 rev.0 - 12/2014
87
4