Hitachi PSC-A32MN - Page 127

4 Individual remote controls
PC-ARF
TCGB0106 rev.0 - 12/2014
111
4

Troubleshooting
This function is used to troubleshoot.
Make sure that the troubleshooting is read carefully before requesting for repairs.
1 Select “Troubleshooting” from the help menu and press
“OK”. The list of troubleshooting is displayed then.
OK
OK
OK
Help Menu
Contact Information
Troubleshooting
About Operation
About Indication
ENT
.R
TN.SEL.
2 Select a problem from the list by pressing “ ” or “ ”,
press “OK” and the details of the selected problem are
displayed.
OK
OK
OK
Troubleshooting
Generation of Mist
Fan speed is not as set.
COOL/HEAT OP NOT POSSIBLE
Operation stops.
01
/
03
Unit does not operate.
ENT
.R
TN.SEL.
3 Press “ ” or “ ” to scroll the text up and down.
Troubleshooting
Following do not indicate a failure
01
/
06
Unit does not operate.
Condition:
HOT-ST is indicated on the
display of the remote comtrol switch.
Cause: The control to heat compressor
is activated in order to extend the
life of the product.
Next Page RTN.
OK
4
Press “
” (return). The screen returns to the list of
troubleshooting.
OK
Troubleshooting
Generation of Mist
Fan speed is not as set.
COOL/HEAT OP NOT POSSIBLE
Operation stops.
01
/
03
Unit does not operate.
ENT
.R
TN.SEL.
OK
5
Press “
” (return). The screen returns to the help
menu.
To return to the normal mode, press “
” (return) again.
OK
Help Menu
Contact Information
Troubleshooting
About Operation
About Indication
ENT
.R
TN.SEL.
OK