Hitachi PSC-A32MN - Page 376


Button Setting
Button setting is used to select whether to show or hide certain operation buttons, thus restricting operation.
1
Select “Button Setting” on the screen of “Service Menu”.
2
Select the function concerning each items. The selected function appears highlighted in yellow.
3
Tap “Setting completed” to conrm the set contents and return to Service Menu screen.
(1)
(2)
(3)

Contact Information Register
This function is used to edit or register the displayed contact information.
1 Select “Contact Information Register” on the “Service Menu” screen.
(1)
2 Tap “Name Edition” or “TEL. No. Edition” buttons (2) to register the information corresponding to each eld of “Con-
tact Information 1” and “Contact Information 2”.
3 Enter the desired text at the keyboard screen.
(2)
NOTE
Only numbers and symbols are available at the key-
board when inserting telephone numbers.
4
The name elds have a maximum length of 50 characters.
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
360