Maintenance
Vacuum Compartment
Once a month
Pull out the Vacuum Case.
For how to remove,
Pg.60
Be sure to remove foods contained in the Vacuum Case.
Wipe off dirt from the groove for attaching the vacuum
compartment gasket.
Remove the Antioxidation Fresh
Cassette.
Pg.43
Wipe off dirt from the Antioxidation Fresh Cassette with a
firmly wringed wet cloth.
Attach the Vacuum Case.
For how to attach,
Pg.60
Remove the vacuum compartment
gasket from the Vacuum Case.
Grasp the tab of the vacuum
compartment gasket on the
observer's upper right and
remove it by hand
carefully.
When the Vacuum Compartment Gasket is dirt
Rinse dirty portion in water using
a soft sponge, etc.
※ Do not use the detergents, etc.
Attach the Antioxidation Fresh
Cassette to the Vacuum Case.
Wipe off following parts with a soft
cloth whi
ch is steeped in lukewarm
water.
Wipe off excess moisture with a
dry cloth and dry it out naturally.
Attach the vacuum compartment gasket.
Align the tab to the notch accurately, and then combine
them together.
1
1
2
5
2
4
3
3
4
Tab
Groove for attaching the
vacuum compartment gasket.
Vacuum compartment gasket
Notch of the groove
Tab
● Do not rinse the Antioxidation Fresh Cassette in water.
● Do not touch the glass on the ceiling in the compartment
(photocatalyst & LED light) with a finger or do not rub it
with a dry cloth. Use a wet cotton-tipped stick, etc. to
remove dirt, gently, if any.
● If detergents and others except lukewarm water are used
to clean the vacuum compartment gasket, the vacuum
compartment gasket may be damaged,
deformed or
change in color, which may cause the vacuum state
unable to keep well.
●
Loosened vacuum compartment gasket or loose-fitting door of the
Vacuum Case may cause the vacuum state unable to keep well.
Caution
Vacuum Container
Vacuum Compartment
Gasket seat
Aluminum Tray
Vacuum
compartment
gasket
To Next Page
Loading...
Need help?
General
