~ 5 ~
VARIOUS FUNCTIONS
COOLING OPERATION
Use the device for cooling when the outdoor temperature is above 10°C.
If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor unit.
Press the button so that the display indicates
“COOL”.
Set the desired FAN SPEED with the button (the
display indicates the setting).
(AUTO) : The FAN SPEED is HI at first and varies to MED
automatically when the preset temperature has been
reached.
HI (HI) : cool quickly.
ME (MED) : cool
LO (LOW) : Quiet
Set the desired room temperature with the buttons (the
display indicates the setting).
The temperature setting and the actual room temperature may vary
somewhat depending on conditions.
Press the button. Cooling operation starts with a beep.
Press the button again to stop operation. The cooling function does
not start if the temperature setting is higher than the current room
temperature (even though the “RUNNING” (OPERATION) lamp
lights).
The cooling function will start as soon as you set the temperature
below the current room temperature.
■ As the settings are stored in memory in the remote controller, you only
have to press the button next time.
※ Operating range of cooling：indoor 21°C ~32°C，outdoor 10°C ~43°C.
To Next Page
Loading...
