EasyManua.ls Logo

Hitachi RA-08HV - Powerful Operation; Lock Setting

Hitachi RA-08HV
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
~ 7 ~
POWERFUL OPERATION
During the operation (DEHUMDIFYINGCOOLING), you can press the button
to start the powerful operation.
Press the button during running operation.
Powerful operation starts with a beep sound.
The powerful indicator light of the indoor unit will turn on.
Press the button again.
Powerful operation cant work during SLEEP operation.
If the difference between the room temperature and setting temperature is very large when machine begins to
start, even though press the button, the operation may not change any more. (Because the
machine has been running powerful operation automatically.)
During powerful operation, the wind will increase and cause more noises.
When the room temperature is equal to or less than the setting temperature, the powerful operation cant go on
even though you press the button.
LOCK SETTING
After the lock setting is done, you just only can use the button and the (TEMP.) button to change
mode, the others are invalid.
Choose the operating mode, fan speed and setting temperature you want
In the power off state, press and hold the the button first and press the
lower location of (TEMP.) button later.
(In the meanwhile there will show the mark on the
display of the remote controller.)
Repeat the procedure above to cancel the lock setting.
After finished the lock setting, the machine will go on by the set operating mode and fan speed from the next time,
but you still can adjust the setting temperature you desired.
After finished the lock setting, the functions of the buttons are invalid except the and (TEMP.)
buttons, so be careful please before you operate.
If you choose the timer setting reservation first, then the lock setting is invalid.
The lock setting just only can be set in the power off state. So you cant execute it when there is the mark of
RUNNING on the display of the remote controller.
CANCEL
CONTENT OF THE POWERFUL OPERATION
OPERATING MODE
Manual
operation
Dehumidifying
Coo lin g
SET T ING OCCASION
want more drying quickly
want more cooling quickly
OPERATION DESCRIPTIO N
Powerful operation (cooling, dehumidifying ),
will go on immediately.
After the powerful operation in one hour longest, the
machine will change into the original
(cooling,dehumidifying) operation respectively.
CANCEL
NOT IC E
NOTICE
POWERFUL
button
POWERFUL
POWERFUL
POWERFUL
POWERFUL
POWERFUL
ON/OFF
ON/OFF

Related product manuals