Hitachi RAC-25WPE - SERVICE AND MAINTENANCE; Disassembly and Reassembly Procedure

OUTDOOR UNIT
1. Electrical parts
(1)Remove the service value cover lock screws
and lower the cover to remove it.
(2)Remove the top cover lock screw and raise the
cover to remove it.
Fig. 3
MODEL RAC-42/ 50WP
(1)Remove the service value cover lock screws
and lower the cover to remove it.
(2)Remove the top cover lock screw and raise the
cover to remove it.
Fig. 1
OUTDOOR UNIT
MODEL RAC-18 / 25/ 35WPE
1. Electrical parts
E
Procedure for Disassembly and Reassembly
Fig.
Fig. 2
4
(3)Remove the electrical box lock screw.
(4)Remove the terminal cover lock screw.
(5)Remove each connector and earth cable from
. xob lacirtcele eht evomer,nehT
.eriw dael eht
(3)Remove the electrical box lock screw.
(4)Remove the terminal cover lock screw.
(5)Remove each connector and earth cable from
. xob lacirtcele eht evomer,nehT
.eriw dael eht
19