DEUTSCHFRANÇAIS
ITALIANOSPANISHPORTUGUÊS
∂ÏÏËÓÈοРУССКИЙ
2
Press the (TIME) button. The time indication starts lighting instead of blinking.
• The time indication will disappear automatically in 10 seconds.
• To check the current time setting, press the
(TIME) button
twice. The setting of the current time is now complete.
• The timer may be used in three ways: off-timer, on-timer and ON/OFF (OFF/ON)-timer. Set the current time at first
because it serves as a reference.
• As the time settings are stored in memory in the remote controller, you only have to press the
(RESERVE) button in
order to use the same settings next time.
2
Set the turn-off time
with the TIMER control
button.
3
Point the signal window of the remote controller toward the indoor unit, and press
the
(RESERVE) button.
The
(OFF) mark starts lighting instead of blinking and the (RESERVED) sign
lights. A beep occurs and the
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn off at P.M.11:00.
The setting of turn-off time is now complete.
3
Point the signal window of the remote controller toward the indoor unit, and press
the
(RESERVE) button.
The
(ON) mark starts lighting instead of blinking and the (RESERVED) sign lights.
A beep occurs and the
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn on early so that the preset
temperature be almost reached at A.M.7:00.
The setting of the turn-on time is now complete.
2
Set the turn-on time
with the TIMER control
button.
4
Set the turn-on time
with the TIMER control
button.
Example:
For heating, the device will turn off at P.M.10:30, and
then turn on early so that the preset temperature be
almost reached at A.M.7:00; for cooling and
dehumidifying, it will simply turned on at A.M.7:00. The
settings of the turn on/off times are now complete.
5
Point the signal window of the remote controller toward the indoor unit, and press
the
(RESERVE) button.
The
(ON) mark starts lighting instead of blinking and the (RESERVED) sign lights.
A beep occurs and the
(TIMER) lamp lights on the indoor unit.
To Next Page
Loading...
