– 12 –
VARIOUS FUNCTIONS
• If there is a power failure, operation will be automatically restarted when the power is resumed with previous
operation mode and airflow direction. (As the operation is not stopped by remote controller.)
• If you intend not to continue the operation when the power is resumed, switch off the power supply.
When you switch on the circuit breaker, the operation will be automatically restarted with previous operation
mode and airflow direction.
Note: 1. If you do not require Auto Restart Control, please consult your sales agent.
2. Auto Restart Control is not available when Timer or Sleep Timer mode is set.
AUTOMATIC OPERATION
Press the (START/STOP) button.
■ Direct selection
Press the
(AUTO) button. Operation start with a beep at previous AUTO mode.
1
STOP
The device will automatically determine the mode of operation, HEAT or COOL depending on the initial room
temperature. The selected mode of operation will change when the room temperature varies.
To Next Page
Loading...
