(
冷
房
通
電
）
Over defrosting inhibit period
Start/Stop button
Fan speed
set to "Hi"
Defrost signal
Preheating judgment
Preheating released
Indoor fan
Hi
Med
Lo
Ultra-Lo
Outdoor fan
Operation lamp
Reversing valve(cooling
"on" mode)
Hi or Lo
Deceleration
period
Reverse cycle period
20' MAX.
20' MAX.
Reverse cycle period
3' MAX.
Preheating
Preheating released
Stop
15' or more
Auto fresh defrosting
Hi or Lo
Reversing valve defrosting
(1) Pressing the "POWERFUL" button will increase the temperature setting by PWSFTW.
Hi
(2) The powerful operation is for 20 minutes after setting.
(3) Operation is continued forcibly thermo-ON for 20 minutes after the powerful operation is finished.
(4) Defrost is inhibited for 20 minutes after the start of the powerful operation.
(5) Pressing the "START/STOP" button and "POWERFUL"button during powerful operation wil cancel
(6) If the sleep timer is set during powerful operation, the powerful operation will be canceled.
(7) When the powerful operation is set, the fan speed will be set to "HIGH" and the compressor's
maximum speed will be set to WMAX2 during powerful operation. The compressor's lower limit
(8) After the powerful operation is ended, the system automatically operates with the previous settings
speed is WKYMIN_PW.
used before the powerful operation.
the powerful operation.
20
To Next Page
Loading...
