FAN OPERATION
AUTO SWING OPERATION
User can use the device simply as an air circulator.
VERTICAL SWING
HORIZONTAL SWING
START
STOP
1
2
Press the Mode selector so that the display indicates
(FAN).
Set the desired Fan Speed wiith the (Fan Speed) button (the
display indicates the setting).
(High) (Med) (Low) (Silent)
Press the (Start/Stop) button. Fan operation starts with
a beep. Press the button again to stop operation.
■ To start Vertical Auto Swing
■ To start Horizontal Auto Swing
■ To cancel Vertical Auto Swing
■ To cancel Horizontal Auto Swing
• Press (Auto Swing (Vertical)) button. The defl ector(s) will start
to swing up and down.
is displayed on the LCD.
• Press
(Auto Swing (Horizontal)) button. The defl ectors will
start to swing right and left.
is displayed on the LCD.
• Press
(Auto Swing (Vertical)) button again. The defl ector(s)
will stop in the current position.
disappeared from the LCD.
• Press
(Auto Swing (Horizontal)) button again. The defl ectors
will stop in the current position.
disappeared from the LCD.
NOTE
• During cooling and dehumidifying operation, do not keep the defl ectors swinging or in the lower position
(in the case of vertical auto swing) for a long time. It may cause dew condensation on the defl ectors.
To Next Page
Loading...
Need help?
General
