ENGLISH
■ How to copy and paste.
Editing the reservation schedule is easy by copying data from one day to
another day.
1. Press (Weekly) button to select Mode A or Mode B.
2. Press
reservation schedule.
3. Press (Day) button to select a day of the week to copy.
4. Press (Copy/Paste) button. Then "Paste" blinks on the
display.
* Press (Cancel) button to cancel the Copy mode. Normal
setting mode is activated.
5. Press (Day) button to select a day of the week to paste.
6. Press (Copy/Paste) button one more time to paste. only
blinks on the display.
7. To continue copying to other days, press or or or
.
Then start from step 3.
8. After copy and paste completed, press (Send) button while
directing the remote controller towards the indoor unit for about 3
seconds. Timer lamp on the indoor unit will blink rapidly.
After beep sound emitted from indoor unit, Timer lamp will light up.
Please ensure that the Timer lamp lights up.
If Timer lamp does not light up, Press
(Send) button again.
• Reservation data will not change if (Send) button is not pressed.
Step 3: Copy and cancel the reservation schedule.
NOTE
• If there is no reservation data, copying data from one day to another day cannot be done.
1
2
3
4
5
6
8
WEEKLY TIMER OPERATION
To Next Page
Loading...
Need help?
General
