To Next PageTo Next Page
Need help?Do you have a question about the Hitachi RAS-10FSXN1E and is the answer not in the manual?
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Type | Split System |
| Coefficient of Performance (COP) | 4.00 |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 290 mm |
| Noise Level (Outdoor) | 48 dB(A) |
Information about identifying and classifying outdoor unit models.
Important safety information and symbols used throughout the manual.
Additional safety precautions for installation and operation.
Safety information regarding pressure vessels and high-pressure switches.
Site conditions and considerations for installing the outdoor unit.
Required clearances around the outdoor unit for installation and maintenance.
Guidelines for installing units with surrounding walls in different directions.
Requirements for foundations and anchoring outdoor units securely.
Guidelines for selecting appropriate refrigerant pipe sizes and connection kits.
Procedure for checking the system for leaks using nitrogen gas pressure.
Safety precautions and concentration limits for refrigerant gas leakage.
Information on drainage pipes and systems for condensation management.
Method for calculating additional refrigerant charge based on piping length and unit type.
Table specifying maximum allowable additional refrigerant charge quantities.
Procedure for charging the system with additional refrigerant.
System for automatically checking and judging the refrigerant amount.
Wiring diagrams for connecting power sources to outdoor and indoor units.
Specific instructions for wiring the outdoor unit.
Procedure for connecting indoor units, CH units, and communication cables.
A checklist to verify the proper operation of the system during and after the test run.
