8 Refrigerant and water piping
Space heating and DHW
TCGB0123 rev.2 - 10/2019
100
8.3.2 Additional hydraulic necessary elements for DHW
The next hydraulic elements are necessary to correctly perform the domestic hot water circuit:
COMMON
The following elements are required for all YUTAKI units.
Type Nº Part name
Piping
connections
1 Water inlet (DHW)
2 Water outlet (DHW)
Field supplied
3
Pressure and temperature relief valve
3a Shut-off valve
3b Water check valve
3c Pressure relief valve
4 Shut-off valve
5 Draining
• 1 Shut-off valve (eld supplied): one shut-off valve (4) must be connected after the DHW outlet connection of the
DHW tank (2) in order to make easier any maintenance work.
• A Security water valve (Field-supplied): this accessory (3) is a pressure and temperature relief valve that must be
installed as near as possible to the DHW inlet connection of the DHW tank (1). It should ensure a correct draining (5)
for the discharge valve of this valve. This security water valve should provide the following:
- Pressure protection
- Non-return function
- Shut-off valve
- Filling
- Draining
? NOTE
The discharge pipe should always be open to the atmosphere, free of frost and in continuous slope to the down side in case that water
leakage exists.
To Next Page
Loading...
Need help?
General