– 12 –
INSTRUCTION OF EACH FUNCTION
TIMER FUNCTION
(SETS THE SAME MODE EVERY DAY)
1
Press the button to display “d.* **
”
The setting for today is displayed.
d1: MON; d2: TUE; d3: WED; d4: THU; d5: FRI; d6: SAT; d7: SUN
2
Press the button.
“d. * ” starts to blink.
3
Press the buttons to enter “d.1.”
A setting made for “d.1” will also be used on “d2 to d.7.”
O
This function is available only when the unit is connected to a full-time power supply.
O
Two timer settings can be made per day.
O
A setting made for Monday (d.1) will also be used on Tuesday (d.2) through Sunday (d.7) in the same
way as on Monday.
O
The unit records the set time.
O
Anti-bacteria mode starts at 22:00 on Sunday every week regardless of timer setting.
Operation example
Monday (d.1)
Tuesday (d.2)
Saturday (d.6)
Sunday (d.7)
To Next Page
Loading...
Need help?
General