Adjusting the Airflow Direction(upward and downward)
CAUTION
1
“ ” is display on LCD screen.
Press the “ (Up/Down)” button again. The deflector(s) will stop
in the current position.
“ ” is disappear on LCD screen.
Adjust the airflow upward and downward.
According to operation, the horizontal air deflector is automatically set to the
proper angle suitable for each operation.The deflector can be swings up
and down and also set to the desired angle using the “ (Up/Down)”
button.
Press the “ (Up/Down)” button . The deflector will start to swing up and
down.
Don't operate the deflector by hands. It might cause of the failure.
In “Cooling” operation, do not keep the horizontal air deflector swinging
for a long time. Some dew may form on the horizontal air deflector and
some dew may drop from it.
• If the “ (Up/Down)” button is pressed once, the
deflector swings up and down.If the button is pressed again, the
deflector stops in its current position. Several seconds (about 6
seconds) may be required before the deflector starts to move.
and stops at the position where the air outlet closes.
horizontal air
• When the operation is stopped, the horizontal air deflector moves
User can use the device simply as an air circulator.
START
Press the M selector button so that the display indicates
(F ).
Press the
button. Fan operation starts with a beep.
Press the button again to stop operation.
Press the button.
Fan Speed
(S ) (L ) ( )
(High)
(Super High)
1
2
STOP
•
•
To Next Page
Loading...
