Powerful Operation
• During Powerful operation, cooler or warmer air will be blown out from indoor unit for Cooling or
Heating operation respectively.
NOTE
•
Press the (Powerful) button during operation.
• " " is displayed on the LCD.
Powerful operation ends in 20 minutes. Then the system
automatically operates with the previous settings used before
Powerful operation.
START
Press the
• " " disappears from the LCD.
CANCEL
•
Press the
(On/Off) button. or
(Powerful) button again.
• During Leave Home operation, fan speed and horizontal and vertical air deflector position cannot be
changed.
• Timer function will be cancel if LeaveHome key press.
• Powerful , SleepSense , Smart Eco , Timer Function , Silent , My Mode operations are disable.
Prevent the room temperature from falling too much when no one is at home .The initial setting
temperature is 10.0℃ and the temperature range can be set between 10.0℃ and 16.0℃.
Press
(LeaveHome) button during stop or
operation.
Room temperature is set at 10.0℃ and heating operation
starts.
Set the desired room temperature with the Temperature
buttons.Temperature range can be set between 10.0℃
and 16.0℃.
• " ", " ", "
", "Set Temperature" is
displayed on the LCD.
(On/Off) button. orPress the
(LeaveHome) button again.Press the
Change to other Operation Mode.
1
2
START
CANCEL
performs at maximum power.
By pressing
(Powerful) button during Auto, Heat, Dry, Cool, or Fan operation, the air conditioner
Powerful
Powerful
Powerful
• When SleepSense Smart Eco operation, LeaveHome Operation,Silent Mode or My mode is
selected , Powerful Operation will be cancelled.
• During Powerful operation, capacity of the air conditioner will not increase
– if the air conditioner is already running at maximum capacity.
– just before defrost operation (when the air conditioner is running in Heating operation).
LeaveHome Operation
NOTE
To Next Page
Loading...
Need help?
General
