●
●
The process of indoor FrostWash
●
lamp on the indoor unit lights up during FrostWash operation.
●
●
In order to protect the product, FrostWash function cannot be carried out again for about 60 minutes after
FrostWash operation is completed.
" "
The dust and dirt adhering to indoor heat exchanger which is the cause of the smell. They are washed away
by freezing and thawing of the heat exchanger.
FrostWash function can work when the outdoor temperature is 1℃ to 43℃ and Indoor humidity is 30% to 70%.
Operation is started
FrostWash operation Unit remain in standby mode
120min (max)
Operation is
stopped
FrostWash ends
is pressed
Normal operation
Indoor FrostWash operation
-9-
■
Indoor FrostWash(Manual Mode)
When the unit is off, press (FrostWash) button, manual FrostWash will start.
■ How to start and cancel indoor FrostWash (Manual mode).
display on LCD screen.
" lamp light up on the
1
●
After one hour, "
indoor unit will stop
" disappears from the LCD. After about two hours, the
operation.
●
In order to protect the product, FrostWash function cannot be carried out
again for about 60 minutes after the FrostWash operation is completed.
●
Press the FrostWash , nottub FrostWash
FrostWash operation start with beep sound and "
indoor unit.
●
Press the (On/Off) button, the operation will stop.
" " lamp on the indoor unit turns off.
2
Precautions for Use
●
Do not open windows or doors during operation. Water will condense on the air deflector and
drips down occasionally. This will wet your furniture.
●
Do not open or remove the front panel during operation. It may cause injury or malfunction.
●
FrostWash operation does not wash away all dust and dirt.
●
Hissing, fizzy or squeaking noise may generate during FrostWash operation.
●
If the air conditioner is continuously running, FrostWash function is not effective.
●
During FrostWash operation, if power is turned off and then power is restored, FrostWash function will not
restart.
●
After turning on the power, please wait a moment if you want to start FrostWash.
●