The remote controller can be set to fix the Heat Mode (including Fan Mode), Cool Mode and Dry Mode
(including Fan Mode) operations.
■ Method to lock Heat Mode (including Fan Mode) operation.
Press (Mode) and buttons simultaneously for about 3 seconds
when the remote controller is OFF.
“ ”, “ ” and “ ” will be displayed for about 10 seconds. Later, “ ” and “ ”
will remain.
This indicates that Heat Mode operation is locked.
When pressing (Mode) button, “ ”, or “ ” will be displayed.
■ Method to unlock Heat Mode (including Fan Mode) operation.
when the remote controller is OFF.
All operation mode symbols will appear on the display for about 10 seconds “ ”
will disappear. After that, “ ” will remain.
This indicates that Heat Mode operation is unlocked.
■ Method to lock Cool Mode and Dry Mode (including Fan Mode) operations.
Press (Mode) and
buttons simultaneously for about 3 seconds when the
remote controller is OFF.
“ ”, “ ”, “ ” and “ ”will be displayed for about 10 seconds. Later, “ ” and
“ ” will remain.
This indicates that Cool Mode and Dry Mode operation is locked.
When pressing (Mode) button, “ ”, “ ”, or “ ” will be displayed.
■ Method to unlock Cool Mode and Dry Mode (including Fan Mode) operations.
Press (Mode) and buttons simultaneously for about 3 seconds when
the remote controller is OFF.
All operation mode symbols will appear on the display for about 10 seconds “ ”
will disappear. After that “ ” will remain.
This indicates that Cool Mode and Dry Mode operation is unlocked.
Operation Mode Lock
Press (Mode) and
buttons simultaneously for about 3 seconds
NOTE
●
●
●
●
Operation Mode Lock function will not activate if Timer reservations or My Mode is activate.
Timer reservations shall be deactivated first. Then, Operation Mode Lock function can be activated.
Operation Mode Lock can be kept even i f (Reset) button is pressed.
Oper
ation Mode Lock will not be set if FrostWash(Manual Mode) is in progress.
LeaveHome button is disable during lock Cool mode and Dry Mode operation.
To Next Page
Loading...
