To Next PageTo Next PageWhat would cause a problem with the gas pipe thermistor on my Hitachi RCIM-2.0FSN4?
A problem with the gas pipe thermistor in your Hitachi Air Conditioner could be due to a loose, disconnected, broken, or short-circuited connector.
What would cause a problem with the fresh outdoor air thermistor on my Hitachi Econofresh Air Conditioner?
A problem with the fresh outdoor air thermistor (Econofresh) in your Hitachi Air Conditioner could be due to a loose, disconnected, broken, or short-circuited connector.
What would cause a problem with the air inlet DX Coil thermistor on my Hitachi Tincoil Air Conditioner?
A problem with the air inlet DX Coil thermistor (Tincoil) in your Hitachi Air Conditioner could be due to a loose, disconnected, broken, or short-circuited connector.
What would cause a problem with the air outlet DX Coil thermistor on my Hitachi Toutcoil Air Conditioner?
A problem with the air outlet DX Coil thermistor (Toutcoil) in your Hitachi Air Conditioner could be due to a loose, disconnected, broken, or short-circuited connector.
What would cause a problem with the remote sensor thermistor on my Hitachi Air Conditioner?
A problem with the remote sensor thermistor (Trem) in your Hitachi Air Conditioner could be due to a loose, disconnected, broken, or short-circuited connector.
General| Brand | Hitachi |
|---|---|
| Model | RCIM-2.0FSN4 |
| Category | Air Conditioner |
| Language | English |
Pre-installation checks for the model and included manuals.
Explanation of safety symbols used throughout the manual.
Further safety precautions and guidelines for operation and installation.
Guidance on efficient cooling and heating operations and settings.
Explanation and settings for the motion sensor function for capacity saving.
Displays and indications during abnormal conditions and errors.
Step-by-step instructions for cleaning the air filter.
Pre-contact checks for contractors to resolve issues.
List and explanations of various alarm codes indicating unit status.
Preliminary checks required before proceeding with indoor unit installation.
Detailed instructions for the physical installation of the indoor unit.
Preparing the ceiling and positioning suspension bolts.
Securing the indoor unit to the mounting structure.
Specifics on pipe dimensions, thicknesses, and flare nut sizes.
Step-by-step instructions for connecting the drain pipe.
Procedures to verify smooth water flow and check for leaks.
General safety precautions and regulations for electrical work.
Detailed wiring connections for the indoor unit.
Information on terminal board connections and tightening torques.
Guidelines for selecting appropriate wire sizes and capacity.
Minimum wire sizes required for the power source.
Step-by-step instructions for the physical installation of the air panel.
Procedures for conducting a test run after installation.
Essential checks to perform before initiating the test run.
