Hitachi RPC-3.0FSN3 - Necessary Tools and Instrument List for Installation

8
P5416543
2.3 Necessary Tools and Instrument List for Installation
Use tools and measuring instruments (vacuum pump, gas hose, charging cylinder,
gauge manifold, etc.) exclusively for the refrigerant R410A.
NOTE
No. Tool No. Tool No. Tool
1 Handsaw 8 Plier 16 Cutter for Wires
2 Phillips Screwdriver 9 Pipe Cutter 17 Gas Leak Detector
3 Vacuum Pump 10 Brazing Kit 18 Leveller
4 Refrigerant Gas Hose 11 Hexagon Wrench 19 Clamper for Solderless Terminals
5 Megohmmeter 12 Spanner 20 Hoist (for Indoor Unit)
6 Copper Pipe Bender 13 Weigher 21 Ammeter
7
Manual Water Pump
(for Indoor Unit)
14 Charging Cylinder 22 Voltage Meter
15 Gauge Manifold 23 Wrench