Hitachi SH1-007H - Page 80

4-37
Chapter 4
For parameter configuration
[Output terminal function list]
Function
code
Symbol
Function name
Description
034
LOC2
Low-current
indication signal 2
ON if output current is less
than the setting value
[CE103].
035
OL
Overload notice
advance signal 1
ON if output current exceeds
specified value [CE106].
036
OL2
Overload notice
advance signal 2
ON if output current exceeds
specified value [CE107].
037
BRK
Brake release
ON when brake releases.
038
BER
Brake error
ON if abnormality happens in
brake control sequence.
039
CON
Contactor control
This signal is used for power
line contactor control.
040
ZS
Zero speed
detection
ON if output frequency is less
than set value [CE-33].
041
DSE
Speed deviation
over
ON if speed deviation exceeds
the set value.[bb-82] [bb-83]
[bb-84].
042
PDD
Position deviation
over
ON if position deviation
exceeds the set value.
[bb-85] [bb-86] [bb-87]
043
POK
Positioning
completed
ON if positioning is
completed.
044
PCMP
Pulse count
compare match
output
ON when set value and pulse
train counter match.
[CA-97] to [CA-99]
045
OD
Deviation over for
PID control
ON if PID1 control deviation
exceeds the set value [AH-72].
046
FBV
PID1 feedback
comparison
ON if PID1 feedback is within
range. [AH-73] [AH-74]
047
OD2
OD: Deviation over
for PID2 control
ON if PID2 control deviation
exceeds the set value [AJ-17].
048
FBV2
PID2 feedback
comparison
ON if PID2 feedback is within
range. [AJ-18] [AJ-19]
049
NDc
Communication line
disconnection
ON if disconnection of RS485
communication is detected.
050
Ai1Dc
Analog [Ai1]
disconnection
detection
Turns ON/OFF depending on
the window comparator setting
conditions for analog input Ai1.
051
Ai2Dc
Analog [Ai2]
disconnection
detection
Turns ON/OFF depending on
the window comparator setting
conditions for analog input Ai2.
052
Ai3Dc
Analog [Ai3]
disconnection
detection
Turns ON/OFF depending on
the window comparator setting
conditions for analog input Ai3.
053
Ai4Dc
Analog [Ai4]
disconnection
detection
Turns ON/OFF depending on
the window comparator setting
conditions for analog input Ai4.
054
Ai5Dc
Analog [Ai5]
disconnection
detection
Turns ON/OFF depending on
the window comparator setting
conditions for analog input Ai5.
055
Ai6Dc
Analog [Ai6]
disconnection
detection
Turns ON/OFF depending on
the window comparator setting
conditions for analog input Ai6.
056
WCAi1
Window
comparator Ai1
ON if Analog input 1 is within
range. [CE-40] to [CE-42]
057
WCAi2
Window
comparator Ai2
ON if Analog input 2 is within
range. [CE-43] to [CE-45]
058
WCAi3
Window
comparator Ai3
ON if Analog input 3 is within
range. [CE-46] to [CE-48]
059
WCAi4
Window
comparator Ai4
ON if Analog input 4 is within
range. [oE-35] to [oE-37]
060
WCAi5
Window
comparator Ai5
ON if Analog input 5 is within
range. [oE-38] to [oE-40]
061
WCAi6
Window
comparator Ai6
ON if Analog input 6 is within
range. [oE-41] to [oE-43]
[Output terminal function list]
Function
code
Symbol
Function name
Description
062
LOG1
Logical operation
result 1
Determined by the
calculation results of two
output terminals.
063
LOG2
Logical operation
result 2
064
LOG3
Logical operation
result 3
065
LOG4
Logical operation
result 4
066
LOG5
Logical operation
result 5
067
LOG6
Logical operation
result 6
068
LOG7
Logical operation
result 7
069
MO1
General-purpose
output 1
For EzSQ program.
070
MO2
General-purpose
output 2
071
MO3
General-purpose
output 3
072
MO4
General-purpose
output 4
073
MO5
General-purpose
output 5
074
MO6
General-purpose
output 6
075
MO7
General-purpose
output 7
076
EMFC
Emergency force
drive indicator
ON while in force
operation
077
EMBP
Bypass mode
indicator
ON while in bypass
operation
078
WFT
Trace function
waiting for trigger
This signal turns on until
the trace start triggers are
input.
079
TRA
Trace function data
logging
ON while in data sampling.
080
LBK
Low-battery of
keypad
ON while in low battery or
when keypad transfers no
clock data.
081
OVS
Overvoltage power
Supply
ON when overvoltage is
detected in stop status.
084
AC0
Alarm code bit-0
Alarm information is
output as bits by these
signals.
Refer to the P1 User Guide
for more details.
085
AC1
Alarm code bit-1
086
AC2
Alarm code bit-2
087
AC3
Alarm code bit-3
089
OD3
Deviation over for
PID3 control
ON when PID3 deviation
exceeds the value [AJ-37]
090
FBV3
PID3 feedback
comparison
ON when PID3 feedback is
between [AJ-38]/[AJ-39]
091
OD4
Deviation over for
PID4 control
ON when PID4 deviation
exceeds the value [AJ-57]
092
FBV4
PID4 feedback
comparison
ON when PID4 feedback is
between [AJ-58]/[AJ-59]
093
SSE
PID soft start error
ON when PID soft start
became in warning status