Hitachi SJ Series - Page 78

7-23
Chapter 7
Wire Connection and Optional Devices
7.6 Operation and Optional Areas
7.6.1 Structure of Operation and Optional
Areas
7.6.2 Description of Operation and Optional
Areas
・Before removing the operator keypad or
disconnecting a USB device, be sure to turn off the
power supply and wait until the POWER lamp goes
off.
・When removing the operator keypad or
disconnecting a USB device, hold the front cover.
Otherwise, it may cause connection failure.
・Some extended options have predetermined
connecting locations.
・Feedback option -> Slot 2
・Function safety option -> Slot 3
Connecting location
Name Description
RJ45 Operator keypad VOP
The operator keypad VOP is connected. You can take out the
operator keypad outside the panel using a straight LAN cable.
SLOT1 Optional cassette slot 1
You can connect various optional cassettes.
SLOT2 Optional cassette slot 2
You can connect various optional cassettes.
The encoder feedback option must be connected to the slot 2.
SLOT3 Optional cassette slot 3
You can connect various optional cassettes.
USB (micro-B) Connecting area for PC
By connecting with a PC, performs communication with a PC tool
ProDriveNext.
!
Connection of optional cassette
Operator keypad
VOP
RJ45
USB (micro-B)
SLOT1
SLOT2
SLOT3
Operator keypad ( factory default setting)
The operator keypad is connected by default.
Option connection ( factory default state)
Optional slots are closed.